Following these handy tips will help you get the most out of your ClorMatic unit.
DO List
Increase Chlorine Production before party time and return to normal afterwards.
Increase Chlorine Production when temperature goes up.
Increase Chlorine Production when number of guests goes up.
Use Stabilizer (Cyanuric Acid) to Stabilize Chlorine in Pool.
Mount Power Supply in shade or out of the direct sunlight whenever possible.
Decrease when temperature goes down. Fall/winter etc.
Take Pool water sample to Pool Professional once per month.
DON'T List
Do not get fertilizer in your pool. Fertilizers contain nitrates which cause a high chlorine demand on pool water.
Never
use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal dilution of pool water with fresh water. A build up of by products can damage the electrolytic cell.
Do not add any pool water balancing chemicals unless the Chlorinator is turned off.
Do not let Chlorine Stabilizer drop below 50 PPM.
Copyright
Copyright 2007 Jandy Pool Products, Inc. ClorMatic is a registered trademark of Jandy Pool Products. All rights reserved.
